klik tombol ini

Ping your blog, website, or RSS feed for Free

Minggu, 21 Februari 2016

Procedure Of Painting Los Angeles Vinyl Coating Paint On Walls

Procedure Of Painting Los Angeles Vinyl Coating Paint On Walls


by Raymond Scott


Painting concrete walls makes a structure to spruce the area. Though true, there are a number of key issues to be addressed first before painting them using Los Angeles vinyl coating paints. Some of the factors include the type of liquid vinyl that you will use, check for moisture and a primer to be used as the base coat.

Select a paint that matches your preference. These type of paints are popular among Los Angeles CA dwellers because of their resistance to water and not easily affected by sun rays. Do not forget to also choose a paint for the interior paint work. Places such as the basement can be painted using the basement concrete paint which is sold in any home improvement store near you.

Clean the walls. For exterior, use a power washer to remove all the dirt and dust. This ensures paint adheres to the surface to prevent it from flaking. While cleaning the interior, use a scrubber and soapy water to lift the dirt from the walls. It is because the interior is less dirty and therefore does not require thorough scrubbing.

Repair the walls if they are cracked. Such blemishes will make the work seem dubious after completion. Using a concrete mixture. Fill all the holes and cracks using a trowel. Spread it well and level up the surfaces to be even. To ensure a smooth surface, remove any concrete patch that may have fallen on the surface and dried. They make the surface bumpy.

Check the wall for moisture. Vinyl coating paint applied to a surface that is clammy will not adhere properly to it. To seal off moisture, tape a plastic to it. Try to make the plastic as air tight as possible. To test for the presence of moisture, leave the plastic sheet for a day. If there will be no moisture, then the paint can be applied.

To kick start the painting procedure, first apply a thin coat of the primer. In order to ensure that the primer is well applied, use the proper painting apparatus. It does not matter the direction of strokes you make, make sure that you apply it evenly on the wall. Leave it to dry for a day. If you can see the surface through the coat, apply another coat to make the paint opaque.

After the primer is dried, take the vinyl coating paint and spread it evenly throughout the wall surface in triple layers. There are various ways and apparatus to help you apply it. The paint can be applied from a spraying can, a brush or a roller. Make sure not to leave the bristle strokes of the brush. Leave the vinyl layer to dry foe a day without disturbance for it to dry neat.

Next, apply a paint sealer. Apply two layers of sealer should be applied in two layers though drying time should be allowed between each of the layers. This last paint is vital because it reinforces the adherence of vinyl paint to the concrete for long. Vinyl paints not only add to the aesthetic value of the painted surface but also makes it eye catch




About the Author:





You are receiving this because you signed up for it on 2013-04-11 from IP 141.0.9.129


To fine-tune your selection of which articles to receive, just login here
using your username:


To unsubscribe please use the following link:

Unsubscribe




---------------------------------
New Unique Article!

Title: Procedure Of Painting Los Angeles Vinyl Coating Paint On Walls
Author: Raymond Scott
Email: nathanwebster335@live.com
Keywords: Los Angeles Vinyl coating
Word Count: 533
Category: Home & Family
---------------------------------

Tidak ada komentar:

Posting Komentar