Tricks On Car Repainting After Sponge Blasting
When it comes to repainting your car, you first have to deal with the rust because this could eat up all of the material of your frame if not properly treated. This problem occurs when the steel has been untreated and is exposed to water that will lead to its oxidation. You better remove it and treat it with the right chemical.
After you have removed the rust, there might be holes that must have been eaten up by the corrosion. After the sponge blasting, fill the spaces with a body filler that is of high quality so that you can have a smoother outcome. This can also be easily sanded.
You also have to do the block sanding of the panels and this is a better way to do it because it is much easier. If you will not be using a block, there might be some fingermarks that will be left and thus making the surfaces uneven. Coarse sand paper will have to be applied first and the fine ones eventually.
In doing the actual painting, you first start with the indoors and be sure you place the vehicle in an area whew it will not be exposed to environmental elements. A spacious garage would be good for this. Be sure it is properly parked and that there would be no dust and other particle that will stick to the paint by hanging drapes.
The workplace should also en kept organized because this is necessary in order for you to ascertain a good outcome. Keep everything clean and remove all of the clutters on the floor as those would cause accidents by tripping. It must also be free from dust which might stick to the paint as it is applied.
Maintaining the area dry from all kinds of moist as should be pursued because water is the most common cause of corrosion. You must also ensure proper ventilation because this job would involve the emission of fumes from the chemical you will be working on. You can install a fan for the exhaust or a furnace filter if ever you are not in an open space.
The primer that you will be applying should also have the right equality if not the best since this will be necessary in providing protection to the body of the car. It will also keep the paint in sticking to the panels. This will definitely result to a longer staying finish.
A base and clear paint system can work well and would be friendly to your budget and it can also be applied quickly and without a hassle. The luster of the car would also be great making it even shiner as it is good in hiding scratches form rocks as well as chips. This will also keep you from exerting much effort.
For you to be able to get a smooth finish, the appropriate painting gun should be obtained as this tool requires an easy operation for you to be able to get adequate control while you spray. The ones with bad quality would have the tendency to spray in amounts which are unequal. You would also have to get an oil separator for the contaminants and pressure regulator.
After you have removed the rust, there might be holes that must have been eaten up by the corrosion. After the sponge blasting, fill the spaces with a body filler that is of high quality so that you can have a smoother outcome. This can also be easily sanded.
You also have to do the block sanding of the panels and this is a better way to do it because it is much easier. If you will not be using a block, there might be some fingermarks that will be left and thus making the surfaces uneven. Coarse sand paper will have to be applied first and the fine ones eventually.
In doing the actual painting, you first start with the indoors and be sure you place the vehicle in an area whew it will not be exposed to environmental elements. A spacious garage would be good for this. Be sure it is properly parked and that there would be no dust and other particle that will stick to the paint by hanging drapes.
The workplace should also en kept organized because this is necessary in order for you to ascertain a good outcome. Keep everything clean and remove all of the clutters on the floor as those would cause accidents by tripping. It must also be free from dust which might stick to the paint as it is applied.
Maintaining the area dry from all kinds of moist as should be pursued because water is the most common cause of corrosion. You must also ensure proper ventilation because this job would involve the emission of fumes from the chemical you will be working on. You can install a fan for the exhaust or a furnace filter if ever you are not in an open space.
The primer that you will be applying should also have the right equality if not the best since this will be necessary in providing protection to the body of the car. It will also keep the paint in sticking to the panels. This will definitely result to a longer staying finish.
A base and clear paint system can work well and would be friendly to your budget and it can also be applied quickly and without a hassle. The luster of the car would also be great making it even shiner as it is good in hiding scratches form rocks as well as chips. This will also keep you from exerting much effort.
For you to be able to get a smooth finish, the appropriate painting gun should be obtained as this tool requires an easy operation for you to be able to get adequate control while you spray. The ones with bad quality would have the tendency to spray in amounts which are unequal. You would also have to get an oil separator for the contaminants and pressure regulator.
About the Author:
You can visit www.anconstructioninc.net for more helpful information about Tips On Painting Your Car After Sponge Blasting.
You are receiving this because you signed up for it on 2013-04-11 from IP 141.0.9.129
To fine-tune your selection of which articles to receive, just login here
using your username:
To unsubscribe please use the following link:
Unsubscribe
---------------------------------
New Unique Article!
Title: Tricks On Car Repainting After Sponge Blasting
Author: Anita Ortega
Email: nathanwebster335@live.com
Keywords: business, sales, leadership, marketing, news
Word Count: 545
Category: Leadership
---------------------------------
Tidak ada komentar:
Posting Komentar